Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the MG3 2022

Model: MG 3 MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

If you often use the air conditioning in your MG 3 (year 2022), you must proceed with the periodic replacement of the cabin air filter in order to not compromise the quality of the air breathed in the car. Below, you will find the description of all the steps you need to follow to complete the operation.

First of all, get into the car and remove the glove box located on the passenger side, then locate the box containing the air filter and remove the protective cover in order to replace the old filter with a new one of the same type.


Posted on 3 May 2025 by ScegliAuto


Related tutorials

What is the fuse layout of the MG3?
What is the fuse layout of the MG3?
MG 3 (2011-2024 / MK 2) In this video we can see where the fuse boxes of the MG3 are located and what the respective diagrams are, useful in case we need to check the fuses …
How to reset the service light on the MG MG3?
How to reset the service light on the MG MG3?
MG 3 (2024-2026 / MK 3) In this tutorial we can see how to reset the service in the MG MG3, an extremely simple and quick operation, to be carried out only once all schedule…
How to change the battery of the MG3 key.
How to change the battery of the MG3 key.
MG 3 (2011-2024 / MK 2) In the following article, we will see how to replace the battery of the MG3 key remote. To perform this operation, you will need a small flathead scr…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos