Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse layout of the MG3?

Model: MG 3 MK 2 - Years 2011-2024
Part: Fuse box

In this video we can see where the fuse boxes of the MG3 are located and what the respective diagrams are, useful in case we need to check the fuses of a malfunctioning device. We find the first box inside the passenger compartment, in the lower left area of the dashboard on the driver's side. The second box is instead located inside the engine compartment, protected by the black plastic cover next to the battery. Make sure to replace faulty fuses with replacements of the same amperage and always operate with the vehicle turned off.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the MG MG3?
How to reset the service light on the MG MG3?
MG 3 (2024-2026 / MK 3) In this tutorial we can see how to reset the service in the MG MG3, an extremely simple and quick operation, to be carried out only once all schedule…
How to reset the service in the MG MG3?
How to reset the service in the MG MG3?
MG 3 (2011-2024 / MK 2) In this tutorial we can see how to reset the service in the MG MG3, an extremely simple and fast operation, to be carried out only once all scheduled…
How to change the battery of the MG3 key.
How to change the battery of the MG3 key.
MG 3 (2011-2024 / MK 2) In the following article, we will see how to replace the battery of the MG3 key remote. To perform this operation, you will need a small flathead scr…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos