Do it yourself
| ||||
|
MG 3 - Video tutorial
Model: MG 3
MK 2
- Years 2011-2023 Let's see together the steps that will allow us to recharge the 12 V battery of the MG 3, following the instructions below. First of all, we open the bonnet of our car and start connecting the cables of the battery charger (we correctly connect the positive and negative poles on the battery terminals); after which we go to turn on our charger, setting the charge for the car. At this point we are going to check the battery voltage with a voltmeter; to be charged it must be greater than 12 V, thus disconnecting the charger!
Posted on 6 June 2022 by ScegliAuto
Other guides that may interest you |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |