Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Fob Battery for the MG 3

Model: MG 3 MK 1 - Years: 2008, 2009, 2010, 2011
Part: Key

See other generations:
Video tutorial

In this guide, find the instructions to replace the battery in the key fob for the MG 3. First, take your key fob and start by removing the back cover. Press inside the side hole with a sharp tool to access the battery compartment, as shown in the video.

Next, remove the old battery and replace it with a new one of the correct type and the same designation. Insert it in the correct orientation and secure the plastic cover to complete the replacement.


Posted on 28 September 2026 by ScegliAuto


Related tutorials

MG 3 (2011-2024 / MK 2) To replace the battery in an MG vehicle key fob, remove the side cover of the remote. Then, insert a small screwdriver into the slot to open the remo…
MG 3 (2011-2024 / MK 2) In this tutorial, you will see how to replace the remote battery of the MG 3, a very simple and quick operation. For this, you will need a small flat…
MG 3 (2011-2024 / MK 2) In the following article, we will see how to replace the battery of the MG3 key remote. To perform this operation, you will need a small flathead scr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos