Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. 3
    4. : Positioning and layout of the fuses of the Mg 3

MG 3 - Video tutorial

Model: MG 3 MK 2 - Years 2011-2023
Part: Fuse box
Operation: Positioning and layout of the fuses of the Mg 3

Today we will see, in this video tutorial, the positioning and the diagram of the fuses of the Mg 3, following these simple steps. First of all, let's find the internal fuse box, which we find on the passenger side under the glovebox; instead we find the external fuse box on the engine compartment, removing the plastic cover located next to the battery, as shown in the video. At this point we will see the diagram and the diagram of the fuses, which we find both inside the covers and in the vehicle use and maintenance booklet, replacing any broken fuse!


Posted on 4 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos