Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the MG ZS?

Model: MG ZS Zs11 - Years 2017-2024
Part:

It will be possible to completely remove the Service light from the instrument panel of the MG ZS by inflating the tires until they are brought back to the correct pressure value: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument panel and navigate through the menu to find the option indicating tire pressure: if this screen shows the new values, the light will turn off, otherwise you will need to drive for a few kilometers so that the sensors turn off the light.

Posted on 6 November 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you reset the tire pressure warning light on the MG ZS?
How do you reset the tire pressure warning light on the MG ZS?
MG ZS (2017-2024 / Zs11) The tire pressure warning light reset on the MG ZS is done by first inflating the tires to the correct pressure value: this value will be indicated o…
How do you reset the tire pressure warning light in the MG ZS?
MG ZS (2017-2024 / Zs11) Below you will find information on how to correctly reset the tire pressure warning light in the MG ZS. The steps are very simple and quick. As advis…
How do you reset the tire pressure warning light on the MG ZS?
How do you reset the tire pressure warning light on the MG ZS?
MG ZS (2017-2024 / Zs11) In order to reset the tire pressure warning light of the MG ZS, you will need to inflate the tires to the recommended pressure value: this value is i…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos