Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the MG ZS Wipers to Service Mode

Model: MG ZS Zs11 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Windshield wipers

See other generations:
Video tutorial

Let's see how to set the service mode for the MG ZS wipers so you can lift the blades off the windshield for replacement or cleaning: turn on the ignition, put the car in "Park," then turn off the power. Within 30 seconds of turning off, pull the wiper lever towards you and hold it for a couple of seconds.

The blades will automatically lift and stop in a vertical position on the windshield, entering service mode. To exit this mode, start the car normally without touching the lever, and the wipers will return automatically to the resting position.


Posted on 6 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the MG ZS?
How to Reset the Service Light on the MG ZS?
MG ZS (2017-2024 / Zs11) In this tutorial, you will see how to reset the service light on the MG ZS, a very simple and quick operation to perform only after completing all re…
How to reset the service in the MG ZST?
How to reset the service in the MG ZST?
MG ZS (2017-2024 / Zs11) In this tutorial we can see how to reset the service in the MG ZST, an extremely simple and fast operation, to be performed only once all scheduled m…
How to reset the service light on the MG ZS?
How to reset the service light on the MG ZS?
MG ZS (2017-2024 / Zs11) In this tutorial, we can see how to reset the service in the MG ZS, an extremely simple and quick operation, to be performed only once all scheduled …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos