Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Position Bulb on MG TF

Model: MG MG Various
Part: Headlight bulb

In today's guide video, we will see how to remove and replace the position bulb of the front headlamp on an MG TF. First, open and lift the car's bonnet and remove the protective cap for the bulbs: to do this, unscrew the screws of the cover with a screwdriver. At this point, remove the position bulb by pulling it out along with the bulb holder: then extract it from the holder and replace it with the new one, as shown in the video. Now reposition the bulb holder inside the headlamp and replace the plastic cover followed by the screws!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on an MG GS
How to Replace the Front Headlamp Bulb on an MG GS
MG MG Various To replace the front headlamp bulb on an MG GS, open the bonnet to access the rear of the headlamp corresponding to the bulb that needs replacing. Yo…
How to replace the headlight bulb of the MG 6.
How to replace the headlight bulb of the MG 6.
MG MG Various In this brief guide, we will see the steps that will allow us to disassemble and replace the low beam bulb of the front headlight of the MG 6. First,…
Replacing Headlight Bulbs on an MG
Replacing Headlight Bulbs on an MG
MG MG Various Learn how to replace the headlight bulbs on an MG. Open the bonnet and secure it. Locate the inspection cap of the headlight (located at the back of …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos