Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter on the Mg Rx5

Model: MG MG Various
Part: Cabin air filter

Let's see in this guide how to remove and replace the cabin air filter of the Mg Rx5, in simple and quick steps. First we get on board the car, on the passenger side, and start opening the glovebox; after which we go to unhook the latter to subsequently remove the cover of the passenger compartment air filter box, as shown in the video. At this point we extract and replace the pollen filter with the new one, of the right type; insert it in the correct direction and reassemble everything, reassembling the glovebox!

Posted on 25 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the MG 350 - Roewe 350.
How to replace the cabin air filter of the MG 350 - Roewe 350.
MG MG Various Let's take a look at the necessary instructions for disassembling and replacing the cabin air filter on the MG 350 and Roewe 350 in this short and si…
How to replace the cabin filter in the MG 6?
How to replace the cabin filter in the MG 6?
MG MG Various As we can see in this tutorial, replacing the cabin air filter in the MG 6 pick-up is a very quick and easy operation. First of all, let's go to the …
How to replace the cabin air filter on Mg HS
How to replace the cabin air filter on Mg HS
MG MG Various Below we will see how to replace the passenger compartment air filter on the car: first of all, access the passenger compartment on the passenger sid…

Other guides you may be interested in

How to Fit Seat Covers on a Renault Clio

How do you fit seat covers on your Renault Clio? Watch this video for guidance. First, move the seat forward and raise the seat base, then remove the headrest from the backrest. Slide the seat cover from the top down over the backrest, removing any controls on the side of the seat if necessary by pulling them towards you. After fitting the upper seat cover, ensure it is around the headrest seals. Fit the lower seat cover on the base, pull the springs with the metal clips and secure them. Use plastic spatulas to assist with the fastening.

Watch the video!


by ScegliAuto

More videos