Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in an MG 6?

Model: MG MG Various
Part: Cabin air filter

Video tutorial

In this tutorial, replacing the cabin air filter in the MG 6 pickup is a very simple and quick operation. First, go to the passenger seat, then open the glove compartment and, using a flathead screwdriver, remove the two internal locks by turning them clockwise.

Once done, fully lower the drawer and locate the long rectangular cover, which can be opened by unlocking the relevant clips. At this point, you can remove the old filter and insert the replacement, ensuring it is fitted the correct way.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on the MG 350 - Roewe 350
How to Replace the Cabin Air Filter on the MG 350 - Roewe 350
MG MG Various This brief and simple guide provides the necessary instructions to remove and replace the cabin air filter on the MG 350 and Roewe 350. First, get in…
How to Replace the Cabin Air Filter of the MG RX5
How to Replace the Cabin Air Filter of the MG RX5
MG MG Various This guide shows you how to remove and replace the cabin air filter of the MG RX5 in simple and quick steps. First, get into the vehicle on the passe…
How to Replace the Cabin Air Filter on the MG HS
How to Replace the Cabin Air Filter on the MG HS
MG MG Various Follow these steps to replace the cabin air filter on the vehicle: First, access the passenger side cabin and open the glove compartment. Unclip the …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos