Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in the MGF

Model: MG MG Various
Part: Air filter

Video tutorial

In today's video, you will see how to replace the air filter in the MGF; this also applies to the subsequent MG TF, as the vehicle is based on the same platform. Since this is a mid-engine vehicle, the filter is located at the rear of the car. First, disconnect the rear part of the hood to lift it and access the engine compartment.

Then, unclip the air filter housing and remove it. You can now take out the old air filter and proceed with its replacement using a new unit of the same type, then refit everything.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on an MGF
How to Replace the Spark Plugs on an MGF
MG MG Various Before you begin, open the bonnet of your MGF. Start by unscrewing the screws that secure the spark plug cover, then remove the spark plug cover itse…
How to Replace the Air Filter in an MG
How to Replace the Air Filter in an MG
MG MG Various In this video tutorial, you will see how to replace the air filter in an MG by following a few simple steps: the first thing to do is to purchase a n…
How to Replace the Air Filter in the MG HS?
How to Replace the Air Filter in the MG HS?
MG MG Various In this tutorial, you will learn how to replace the air filter in the MG HS, a very simple and quick operation. Before proceeding, ensure the engine …

Other guides you may be interested in

How to Replace the Internal Door Handle on the Opel Corsa D

Replacing the internal door handle on the Opel Corsa D is a relatively simple task you can do yourself, especially with the help of our video tutorial. Open the affected door and begin removing the panel. Use a Torx key to undo the screw located behind the handle and the locking handle. Detach the panel and disconnect the connector. Place the panel on a flat surface and remove the handle. With a screwdriver, undo the small screw on the handle mechanism and then remove everything. Insert the new handle and fit the mechanism. Once tested for functionality, reattach the panel to the door.

Watch the video!


by ScegliAuto

More videos