Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in an MG

Model: MG MG Various
Part: Air filter

Video tutorial

In this video tutorial, you will see how to replace the air filter in an MG by following a few simple steps: the first thing to do is to purchase a new air filter from an authorised car parts dealer. Lift the bonnet and secure it with the appropriate prop.

Loosen the clamp holding the intake pipe in place. Disconnect the intake pipe from the air filter housing.

Remove the fastening elements of the filter housing. Lift the cover and remove the old filter element.

Clean the housing and cover, being careful not to let dirt enter the system. Insert the new filter element in place and reassemble all parts in reverse order.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter in the MGF
How to Replace the Air Filter in the MGF
MG MG Various In today's video, you will see how to replace the air filter in the MGF; this also applies to the subsequent MG TF, as the vehicle is based on the sa…
How to Replace the Cabin Air Filter on the MG 350 - Roewe 350
How to Replace the Cabin Air Filter on the MG 350 - Roewe 350
MG MG Various This brief and simple guide provides the necessary instructions to remove and replace the cabin air filter on the MG 350 and Roewe 350. First, get in…
How to Replace the Cabin Air Filter of the MG RX5
How to Replace the Cabin Air Filter of the MG RX5
MG MG Various This guide shows you how to remove and replace the cabin air filter of the MG RX5 in simple and quick steps. First, get into the vehicle on the passe…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos