Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the MG ZS remote control battery?

Model: MG ZS Zs11 - Years 2017-2024
Part: Key

Replacing the MG ZS remote control battery, as we can see in this tutorial, is a very simple and economical operation. To do this, we will need a replacement CR2032 battery and a small flat-tip screwdriver. First of all we press the upper button in order to extend the metal emergency key, then we pry the edge of the newly released slot to unlock the rear door. Once opened, take out the old battery and insert the spare one, taking care to position it with the positive facing us.

Posted on 26 June 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the battery of the MG ZS key remote control
How to replace the battery of the MG ZS key remote control
MG ZS (2017-2024 / Zs11) These short and simple steps will show us how to disassemble and replace the battery of the key remote for the MG ZS. First, we take our remote and s…
How to replace the MG ZS key fob battery
How to replace the MG ZS key fob battery
MG ZS (2017-2024 / Zs11) In this guide, let's briefly see the instructions that will allow us to disassemble and replace the remote control battery of the MG ZS key. First of…
How to replace the remote control battery of the Mg Zs key
How to replace the remote control battery of the Mg Zs key
MG ZS (2017-2024 / Zs11) Let's see in this guide how to disassemble and replace the remote control battery of the Mg Zs key, in simple and quick steps. First, we take our rem…

Other guides you may be interested in

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos