Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the spark plugs on the MG ZS?

Model: MG ZS Zs11 - Years 2017-2024
Part: Spark plugs

In order to replace the spark plugs of the MG ZS you have to go and open the bonnet to have access to the components located inside the engine compartment. Here it will be necessary to unscrew the bolts holding the plastic cover of the upper part of the engine block, removing it to have access to the coils. These must be disconnected from their connectors and removed from their housing to access the spark plugs underneath. The spark plugs can be unscrewed using a socket wrench and then replaced with new spare parts. After replacement, the coils can be reassembled by closing the motor with the relative panel.

Posted on 17 November 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of MG ZS spark plugs
Replacement of MG ZS spark plugs
MG ZS (2017-2024 / Zs11) Today we will see, in this short and simple guide, how to remove and replace the MG ZS engine spark plugs, following the instructions below. First of…
How to replace the rear light bulb on the Mg Zs
How to replace the rear light bulb on the Mg Zs
MG ZS (2017-2024 / Zs11) In today's video tutorial we will see how to remove and replace the rear light bulbs of the Mg Zs, following the instructions below. First of all we …
Where to look for the fuse diagram in the MG ZS?
Where to look for the fuse diagram in the MG ZS?
MG ZS (2017-2024 / Zs11) The fuse diagrams are present, regardless of which car model is being considered, in the car's user manual and inside the fuse box covers. These are …

Other guides you may be interested in

How to Replace the Fuel Filter on a Ford Focus

Want to replace the fuel filter on your car without incurring labour costs? Follow this guide to remove the fuel filter on a Ford Focus yourself. First, lift the bonnet and secure it. Once you locate the fuel filter, disconnect it from the pipes and wiring. Use a spanner and socket to unscrew the securing bolts of the upper filter cover, then unscrew the central bolt on the filter. Remove the worn filter and refit the cap with the new filter. Reattach the filter cover in the engine bay with all its parts (pipes and wiring).

Watch the video!


by ScegliAuto

More videos