Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to replace the rear light bulb on the Mg Zs

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Rear light bulb
Operation: How to replace the rear light bulb on the Mg Zs

In today's video tutorial we will see how to remove and replace the rear light bulbs of the Mg Zs, following the instructions below. First of all we open the tailgate of the trunk and begin to remove the plastic cover that we find on the side of the light; then we use a socket wrench to unscrew the headlight screws, disconnecting the electrical connector of the bulbs to remove it, as shown in the video. At this point we replace the position or stop bulbs with new ones, of the right type; then we reassemble everything, applying the reverse procedure!


Posted on 10 May 2024 by ScegliAuto



How to replace the rear light bulb on the MG ZS?
MG ZS (2017-2024 / Zs11) In order to replace the rear light bulb of the MG ZS you have to open the tailgate so that you can have access to the screws that fix the light insid
How to replace the headlight bulb on the Mg Zs
MG ZS (2017-2024 / Zs11) In this video tutorial we will see the main instructions on how to remove and replace the headlight bulb of the Mg Zs. First of all, we open the bonn
How do you replace the headlight bulb on your MG ZS?
MG ZS (2017-2024 / Zs11) In order to replace the bulb in the MG ZS headlight, you need to open the bonnet, so that you can access the inside of the headlight corresponding to

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos