Do it yourself
Frequently asked questions about cars and motorcycles

How to reset service in MG ZST?

Model: MG ZS Zs11 - Years 2017-2024
Part: Service warning light

In this tutorial we can see how to reset the service in the MG ZST, a very simple and fast operation, to be performed only after completing all the required maintenance work. First of all, turn on the instrument panel, then remove all warnings from the display and switch screens by scrolling to the right or left. Once the indicated screen is reached, select the "Next service" item and hold down the "OK" key for about 3 seconds to reset. We then return to the main screen and restart the framework to verify that the procedure was successful.

Posted on 17 November 2022 by ScegliAuto

Video tutorial

Related tutorials

MG ZS (2017-2024 / Zs11) In this tutorial we can see how to reset the service in the MG ZST, an extremely simple and fast operation, to be performed only once all scheduled m…
MG ZS (2017-2024 / Zs11) In this very useful guide, we are shown how to perform a service reset using the right steering wheel keypad on an MG ZS, a model produced from 2017 …
MG ZS (2017-2024 / Zs11) In this tutorial, we will see how to reset the service indicator in the MG ZS, a very simple and quick operation that should be done only after compl…

How to Replace the Radio in a Ford Focus

First, engage the handbrake and put the car in a low gear to prevent it from rolling during the replacement. Next, lift the bonnet to disconnect the battery cables and protect the electronic components. Unscrew the two screws located under the front panel of the stereo. Use a plastic lever to lift the bottom of the stereo. Disconnect the connector at the bottom and also remove the stereo lock at the back. Now, install the new stereo following the guides from the old one.

Watch the video!


by ScegliAuto

More videos