Do it yourself
| ||||
|
Renault Scenic - Video tutorial
Model: Renault Scenic
MK 2, Scenic 2
- Years 2003-2009 In order to remove the handbrake you will have to start removing the lower parts, starting from the side panel, using a plastic lever then lift the panel, now to remove the glove compartment open it and pull it towards you, now remove the brightness adjusters of the panel and external lights. You can extract it by pushing it from the inside, and disconnect the pins on the back, in this way you can unscrew the screws that block the handbrake lever, now you just have to remove the screw that blocks the panel where the brake is attached but no. Now you can gently pull out the handbrake and disconnect the plug on the back.
Posted on 24 September 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |