Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located on the Mini Countryman R60?

Model: Mini Mini R60, Countryman1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To quickly and safely find the OBD2 port located inside your Mini Countryman R60, you need to carefully read the following guide and follow all the steps described. First, go inside the driver's side of the cabin and make sure the car is not turned on, otherwise turn it off for safety reasons.

Then, shift your attention to the bottom of the dashboard and locate the OBD2 port on the left side. Once you have found it, the procedure is successfully completed and if needed, you can connect a diagnostic tool.


Posted on 2 May 2025 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the Mini Countryman R60
Mini (2010-2016 / R60, Countryman1) In this guide dedicated to your Mini Countryman R60 (2010-2016), follow these simple steps to locate the fuse box. First, switch off the car and lift…
Where are the fuse boxes and OBD port of the 2013 Mini Countryman located?
Where are the fuse boxes and OBD port of the 2013 Mini Countryman located?
Mini (2010-2016 / R60, Countryman1) The 2013 Mini Countryman R60 has two fuse boxes and an OBD port inside. The first fuse box is located inside the front hood, between the battery and …
Fuse box location of the Mini Countryman R60/R61
Fuse box location of the Mini Countryman R60/R61
Mini (2010-2016 / R60, Countryman1) In this video, we see where the fuse boxes are located on the Mini Countryman R60/R61: in the engine compartment, we find a rectangular box located o…

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos