Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the 2003 Mini Cooper located?

Model: Mini Mini R53, R50, R52 - Years 2001-2007
Part: Timing belt

To find the OBD port located inside the cabin of your 2003 Mini Cooper in just a few seconds, you only need to carefully read the following guide and follow all the steps. First of all, enter the vehicle and then shift your attention to the lower part of the dashboard and subsequently locate the OBD port you were looking for. Once you have found it, the procedure is complete, but you can easily connect any diagnostic tool to it that is useful for identifying and analyzing the errors detected by your Mini Cooper's control unit.

Posted on 10 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R55, R57, R56) To safely locate the OBD port inside your Mini Cooper R56, you just need to follow the steps described in the following guide addressed to you. First…
Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R55, R57, R56) If you don't know where the OBD port of your Mini Cooper R56 is located, don't worry because thanks to the steps described in the following guide, yo…
Where is the OBD port of the Mini Cooper R50 2003 located?
Where is the OBD port of the Mini Cooper R50 2003 located?
Mini (2001-2007 / R53, R50, R52) If you own a 2003 Mini Cooper R50 and want to find out where the OBD port is located, you just need to read the following guide and apply what is des…

Other guides you may be interested in

How to Change the H7 Headlight Bulb on an Audi A3

When replacing the front headlight bulbs, choosing the right bulbs is certainly the first hurdle to overcome: halogen, blue white light, xenon, or LED. Once you have made your choice, installing the new bulb can be done without removing the headlight. Simply open the front bonnet, locate the protective cap of the bulb holder, and press on the corresponding latch to remove it. Then grasp the bulb's power connector and pull it out along with the bulb itself, disconnect the connector, fit the new bulb, and press it into its seat until it clicks into place.

Watch the video!


by ScegliAuto

More videos