Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Rear-View Mirror of the Mini Countryman

Model: Mini Mini F60, Countryman2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Side mirror

See other generations:
Video tutorial

In a few simple steps, we will see how to remove and replace the external rear-view mirror of the Mini Cooper. First, move to the side and electrically fold the mirror in; then unscrew the fastening screws found at the base of the mirror, disconnecting the electric connector for adjustment to remove it, as shown in the video.

At this point, carry out the repair or replacement, securing it properly with the screws and finally adjusting the angle; below is illustrated the removal of the rear light and the door handle.


Posted on 6 February 2026 by ScegliAuto


Related tutorials

How to replace the external rear-view mirror on the Mini Countryman?
How to replace the external rear-view mirror on the Mini Countryman?
Mini (2010-2016 / Countryman1, R60) To replace the external rear-view mirror on the Mini Countryman, rotate it outward to access the mounting screws underneath. Once these two screws ar…
How to Remove the External Rear-View Mirror of a Mini Cooper
How to Remove the External Rear-View Mirror of a Mini Cooper
Mini (2007-2014 / R56, R57, R55) Before you can start, exit the cabin of your Mini Cooper and head towards the external rear-view mirror. Begin by folding the mirror completely inwar…
How to Remove and Replace the External Wing Mirror on a Mini Countryman
How to Remove and Replace the External Wing Mirror on a Mini Countryman
Mini (2017-2023 / F60, Countryman2) Today's guide will show you the steps to remove and replace the external wing mirror on a Mini Countryman, following the instructions below. First, g…

How to Reset the EDC Light on a Mercedes Sprinter?

When the EDC light appears on the instrument cluster of a Mercedes Sprinter, it indicates a generic malfunction in the vehicle's injection system. To identify the source of the problem, a diagnosis must be performed at a workshop. This will help identify the damaged component, which will need to be replaced or repaired. Once the issue has been physically addressed, connect a diagnostic tool to the vehicle's OBD port located under the steering column. This will allow you to clear the errors in the ECU, turning off the EDC light.

Watch the video!


by ScegliAuto

More videos