Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Bicycle Carrier Installation

Model: Mini Mini Countryman1, R60 - Years 2010-2016
Part: Accessory kit

The vehicle is already prepared to accommodate the bicycle carrier accessory, which is very simple and quick to install. Obtain the original bicycle carrier kit, ensuring it is exactly suitable for the type of vehicle you own. The bicycle carrier installs at the rear of the vehicle in the pre-drilled holes provided by the manufacturer. The holes are hidden by plastic caps fused into the bodywork but are easily recognisable. Once the caps are removed, insert the two ends of the bicycle carrier into the holes, tighten the securing nuts with a spanner, and the installation is complete. When reversing, remember the bulk of the bicycle carrier.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Lights on a Mini Cooper
How to Replace the Rear Lights on a Mini Cooper
Mini (2007-2014 / R57, R55, R56) First, lift the tailgate to access the rear of the light. Then, remove the side panel by simply unclipping it from the appropriate fasteners. Now you…
Installing an Anti-Roll Bar
Installing an Anti-Roll Bar
Mini (2001-2007 / R50, R52, R53) Installing the anti-roll bar is very simple: it should be applied to the supports of the front shock absorbers. Once you open the front bonnet, remov…
How to remove the inner panel of the rear hatch of the Mini Cooper
How to remove the inner panel of the rear hatch of the Mini Cooper
Mini (2001-2007 / R50, R52, R53) In this short guide, we will see the instructions that will allow us to disassemble and replace the rear tailgate panel of the Mini Cooper. First, op…

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos