Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
R52, R50, R53
- Years 2001-2007 Obtain the correct replacement spool. Few tools are required to access the coil replacement. Start removing the metal shield by unscrewing its bolts. Remove the ignition coil connector and unscrew the two retaining bolts with a ratchet wrench by removing them by hand to prevent them from falling out. The coil can now be removed by pulling it upwards. Reassemble the new coil making sure to position the high voltage connectors correctly. Replace the two retaining bolts and reconnect the power connector. If necessary, replace the spark plugs. Carry out a proper functioning test.
Posted on 11 July 2023 by ScegliAuto
Other guides that may interest you |
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |