Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
R52, R50, R53
- Years 2001-2007 The guide shows how to disassemble the ignition coil of the Mini R50. The first step is to open the bonnet; locate the spark plugs, disconnect the cables from the ignition coil and remove them, remembering the extraction sequence. Using a flat screwdriver, disconnect the ignition coil cable. With a 10mm socket wrench, unscrew the fixing bolts of the piece and thus it is possible to detach the coil. After replacing the element, it is a good idea to spread high temperature grease on the ends of the spark plug connectors. At this point it is possible to reassemble the spark plugs. Check the operation of the engine for a few minutes. At this point the operation is finished.
Posted on 2 April 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |