Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel of a Mini Cooper S

Model: Mini Mini R53, R50, R52 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

How to remove the door cover panel? Let’s look at removing the cover panel of the Mini Cooper S. Remove the internal armrest located above the internal handle (door panel), then use a screwdriver to unscrew all the securing screws on the door panel.

Pry with a plastic lever around the frame of the door opening handle, then remove the reflector cap located on the door panel.

Disconnect all the plastic clips and remove the cover panel. Replace the cover panel with a new one if damaged.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Mini (2007-2014 / R57, R56, R55) Today we will go through the procedure to remove the front door panel of the Mini Cooper in simple steps. First, open the front door of the vehicle a…
Mini (2001-2007 / R53, R50, R52) This guide reveals the procedure to remove the door panel on the Mini Cooper, following these simple steps. First, open the front door and start by u…
Mini (2001-2007 / R53, R50, R52) This guide explains how to remove the door handle on a Mini Cooper R 50. To remove the handle, open the relevant door and take off the door panel. Af…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos