Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filler Neck on a Mini Cooper R56

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the fuel filler neck on a Mini Cooper R56, you need to remove the tank located at the bottom of the car, next to the fuel tank. To do this, loosen its fixing screws and disconnect all the connectors attached to it. Once the tank is removed, open it and take out the old filler neck, inserting the new one inside.

Then, the tank must be closed again and installed back at the bottom of the car. Secure it with the appropriate screws and reconnect the connectors.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Headlamp from the Mini Cooper R56
How to Remove the Rear Headlamp from the Mini Cooper R56
Mini (2007-2014 / R57, R56, R55) If you need to remove one of the rear headlamps from your Mini Cooper R56 but don't know how, don't worry as we will explain step by step how to comp…
Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R57, R56, R55) If you don't know where the OBD port of your Mini Cooper R56 is located, don't worry because thanks to the steps described in the following guide, yo…
Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R57, R56, R55) To safely locate the OBD port inside your Mini Cooper R56, you just need to follow the steps described in the following guide addressed to you. First…

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos