Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exterior door handle on the Mini?

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Handle

In order to replace the external door handle of the Mini, you must first remove the door panel by unscrewing all the screws on the panel moldings. Once the screws have been unscrewed, it will be possible to go and detach the panel, in order to access the components below: here you will find the actuator to which the handle is connected. By unscrewing the screws that secure the latter and disconnecting its connectors, it will be possible to detach the handle from the outside of the door, so that the new one can be inserted by fitting all the removed components.

Posted on 11 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the external door handle of the Mini Cooper.
How to remove the external door handle of the Mini Cooper.
Mini (2007-2014 / R57, R55, R56) In this short and simple guide, we will see the steps that will allow us to disassemble and replace the external handle of the front door of the Mini…
How do you replace the external handle of the Mini Cooper?
How do you replace the external handle of the Mini Cooper?
Mini (2014-2023 / F55, F54, F57, F56) To replace the external handle of the Mini Cooper, you will need to open the corresponding door in order to locate the screw on the side of the door,…
How to remove the handle on Mini
How to remove the handle on Mini
Mini (2010-2016 / R60, Countryman1) Remove the external door handle? Let's see the disassembly of the handle. We remove the cover cap of the clamping screw. Using the screwdriver, unscr…

How to Replace the Diesel Filter on a Fiat Freemont

How to replace the diesel filter on a Fiat Freemont? In this video, we will show the replacement: open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, lift the front bonnet and secure it. Remove the engine soundproofing panel, then use a socket to unscrew the bolts on the plate that supports the filter (disconnect the wires and various pipes from the filter) where it is located. Extract the diesel filter and replace it with a new one. Finally, reassemble the diesel filter container (connect the pipes and wires) and tighten the screws. Close the front bonnet at the end.

Watch the video!


by ScegliAuto

More videos