Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restart the Car Radio on a Mini That Won't Turn On?

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Car stereo

If the car radio does not show any signs of life when the engine is started, there may be an electrical issue, particularly with the power supply. The first check is the condition of the power fuse, so locate the fuse box in the passenger compartment on the floor under the dashboard. Remove the cover of the fuse box and find fuse number 45, remove it, check that it is not blown, and if so, replace it; otherwise, wait a few seconds and reposition it. At this point, the radio should work again.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radio from a Mini Cooper
Removing the Radio from a Mini Cooper
Mini (2001-2007 / R53, R52, R50) Replace the radio in the Mini Cooper if it is damaged or worn out. Let's look at the disassembly of the radio. Remove the plastics from the sides of …
Replacing the Standard Car Radio
Replacing the Standard Car Radio
Mini (2007-2014 / R56, R55, R57) This video briefly explains the process of replacing the standard car radio in a Mini Cooper R 56 with a new unit. The new radio appears already inst…
How to Remove the Original Radio on a Mini
How to Remove the Original Radio on a Mini
Mini (2001-2007 / R53, R52, R50) Let’s see how to remove the original radio on a Mini and perform the various operations: use a screwdriver to undo the screws securing the air vent g…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos