Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Mini Cooper towbar located and how is it fitted?

Model: Mini Mini F55, F54, F57, F56 - Years 2014-2023
Part: Checks and maintenance

In the Mini Cooper, we can find the tow bar inside the luggage compartment, in the toolbox under the bottom panel. Once the hook has been recovered, let's move to the front of the car and, as we can see in the attached video, locate the small door on the bumper, on the passenger side. We unlock and open the door, insert the hook and screw it firmly to the thread. Once finished with the tow, unscrew it, close the flap and reposition the hook in its special slot. We carry out towing operations always following the safety procedures provided.

Posted on 8 June 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R57, R55, R56) If you don't know where the OBD port of your Mini Cooper R56 is located, don't worry because thanks to the steps described in the following guide, yo…
Where is the fuse box located in the Mini Cooper R56?
Where is the fuse box located in the Mini Cooper R56?
Mini (2007-2014 / R57, R55, R56) The fuse box of the Mini Cooper R56 is nothing more than the container of all the fuses present and used inside the vehicle. To be honest, there are …
Where is the engine code located in the Mini Cooper?
Where is the engine code located in the Mini Cooper?
Mini (2007-2014 / R57, R55, R56) In this video we can see where the engine code is located in the Mini Cooper R56, useful for example in case we need to find a specific spare part. A…

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos