Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 Port on a 2011 Mini Cooper?

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Checks and maintenance

If you are looking for the OBD2 port located inside the cabin of your Mini Cooper (2011 model), then you just need to follow these steps. First, open the driver's side door and enter the car, ensuring it is turned off, then proceed to locate the OBD2 port situated in the lower area of the dashboard, more precisely on the left side of it. Once you find the OBD2 port of your Mini Cooper, you can also connect a diagnostic tool to analyse the data from the control unit.

Posted on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port located on the Mini Cooper R56?
Where is the OBD2 port located on the Mini Cooper R56?
Mini (2007-2014 / R56, R55, R57) If you want to independently locate the OBD2 port inside the cabin of your Mini Cooper R56, just follow the steps described below and apply them step…
Where is the OBD2 port located on the Mini Cooper S R53?
Where is the OBD2 port located on the Mini Cooper S R53?
Mini (2001-2007 / R53, R52, R50) If you don't know where the OBD2 port of your Mini Cooper S R53 is located, don't worry because thanks to the steps described in the following guide …
Where is the OBD2 port located on the Mini Countryman R60?
Where is the OBD2 port located on the Mini Countryman R60?
Mini (2010-2016 / Countryman1, R60) To quickly and safely find the OBD2 port located inside your Mini Countryman R60, you need to carefully read the following guide and follow all the s…

Other guides you may be interested in

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer
    • Mini 2014-2023 - When to service the Mini Cooper? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos