Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Mini Cooper Countryman

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Service warning light

In this new guide of ours dedicated to your 2016 Mini Cooper Countryman, we are going to describe you the necessary steps to be able to easily reset the car's service light manually. First you obviously have to get inside the passenger compartment and start the instrument panel. Then locate the button located inside the speedometer and hold it down for a few seconds. As soon as the oil warning light appears with the words "Reset possible", release the button and hold it down again until the warning light is completely reset. Finally, turn off the ignition.

Posted on 26 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Mini Countryman R60 brake service light
How to reset the Mini Countryman R60 brake service light
Mini (2010-2016 / R60, Countryman1) In this short video we will see the instructions that will allow us to reset the brake wear service light on the Mini Countryman R60, but also on the…
How to reset the "Service" light on a Mini Countryman?
How to reset the "Service" light on a Mini Countryman?
Mini (2017-2023 / Countryman2, F60) To reset the "Service" light on a Mini Countryman, start by turning on the instrument panel without starting the engine. Press the button located bel…
How to reset the service light on the Mini Cooper
How to reset the service light on the Mini Cooper
Mini (2010-2016 / R60, Countryman1) The service light reset on a Mini Cooper F60 model vehicle follows simple and quick steps to be performed independently. To reset the light, we must …

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos