Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : How to replace brake light bulbs in Mini Cooper?

Mini - Video tutorial

Model: Mini Mini R55, R56, R57 - Years 2007-2014
Part: Light bulb
Operation: How to replace brake light bulbs in Mini Cooper?

To replace the stop light bulb in the Mini Cooper R56 it is necessary to disassemble the entire rear light. We start by removing the chromed plastic part installed around the light so that we can access the three screws underneath and unscrew them. Once these three elements have been removed, the headlight can be released by pulling it outwards with your hands. At this point we can choose whether to disconnect the electrical plugs and remove the entire headlight or whether to open it and replace the stop light bulb without leaving the car. Once the replacement has been made, we can reassemble the headlight following the reverse procedure.


Posted on 10 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Mini 2010-2016 - What does the EML warning light on the Mini Cooper indicate? Read Answer
    • Mini 2017-2023 - How do you replace the brake light bulb on the 2017 Mini? Read Answer
    • Mini 2014-2023 - What bulbs does the Mini Cooper have? Read Answer
    • Mini 2007-2014 - How much does a Mini Cooper reverse light bulb cost? Read Answer
    • Mini 2010-2016 - Spy with exclamation mark on Mini car? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos