Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Roof from a Mini R52

Model: Mini Mini R53, R50, R52 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Convertible top

See other generations:
Video tutorial

To change the roof of the Mini R52, first remove the old one by taking off the central nut and disengaging the clips. From the boot, unscrew the pump screw to lift the roof.

Then tighten the nut to prevent movement. Carefully remove the fabric from its housing, detaching it from the front straps, and then unscrew the two 8mm screws in the middle section; pull down the seal by removing the screws that hold it in place.

Move to the lower part; there is a central clip, then side screws that secure the fabric near the end-stop sensors. Finally, disengage the rear section.

To do this, remove the parcel shelf and unscrew all the screws that secure the roof from the external trim. Also, remove the third brake light.

Repeat the operation from the inside. As you remove the old one, try to understand how it is attached to reinstall the new one. If necessary, take photos.

The most challenging part is the rear, where it folds. There are numerous clips, pins, and electrical connectors.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Replacing the Hood of the Mini Cooper
Replacing the Hood of the Mini Cooper
Mini (2001-2007 / R53, R50, R52) Today, we will go through step-by-step instructions on how to remove and replace the hood of the Mini Cooper in simple and quick steps. First, open t…
How to Calibrate the Roof Motor of the Mini Cooper
How to Calibrate the Roof Motor of the Mini Cooper
Mini (2001-2007 / R53, R50, R52) In this brief and simple guide, you will learn how to calibrate the roof motor of the Mini Cooper. First, get inside the cabin and turn on the instru…
Replacing the Roof Motor on a Mini Cabriolet
Replacing the Roof Motor on a Mini Cabriolet
Mini (2010-2016 / R60, Countryman1) The opening of the Mini Cabriolet roof occurs in two stages: first, an electric motor opens the section above the driver's head, and then a more powe…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos