Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Roof Motor on a Mini Cabriolet

Model: Mini Mini Countryman1, R60 - Years 2010-2016
Part: Checks and maintenance

The opening of the Mini Cabriolet roof occurs in two stages: first, an electric motor opens the section above the driver's head, and then a more powerful hydraulic motor moves the entire roof into the rear compartment. If it becomes necessary to replace the electric motor, first remove the plastic cover from the central pillar to access the motor housing. To remove the old motor, disconnect the wiring and unscrew the three Allen bolts that secure it. Position the new motor, tighten the bolts, reconnect the contacts, and before closing the pillar cover, check the roof's proper operation.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2001-2007 / R53, R52, R50) Today we will see the step-by-step instructions on how to disassemble and replace the hood of the Mini Cooper, in simple and quick steps. First, we o…
Mini (2007-2014 / R56, R55, R57) In this video tutorial, see how to remove the roof cover on a Mini Cooper R57. First, get inside the car and fully lower the windows. Then, remove th…
Mini (2001-2007 / R53, R52, R50) In this short and simple guide, we will show you how to calibrate the convertible top motor of the Mini Cooper. First of all, get into the car and st…

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer
    • Mini 2014-2023 - When to service the Mini Cooper? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos