Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
F55, F57, F56
- Years 2014-2023 Replacing the Xenon bulbs on your Mini Cooper S is a very simple and fast operation, let's see how to proceed in this tutorial. Before doing this, let's make sure that the key is not inserted in order to operate safely. Let's start by opening the bonnet, then disconnect the power connector located on the back of the headlight in question, release the upper clip and remove the plastic cap. We then unhook the two metal rods indicated, grab the bulb and extract it from the housing. Finally, disconnect the connector, connect it to the spare and reassemble everything following the reverse procedure.
Posted on 19 December 2022 by ScegliAuto
Other guides that may interest you |
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.051
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |