Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light on the Mini Clubman F55

Model: Mini Mini F55, F54, F56, F57 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part:

See other generations:
Video tutorial

This guide shows how to replace the bulbs of the third brake light on the Mini Clubman F55. The first step is to open the boot and remove the eight Torx T25 screws. Extract the trim piece from the roof and disconnect the rear screen wash tube and the electrical connector for the third brake light.

Remove the plastic clips securing the light strip and replace it with a new one. Refit the light and secure the electrical connector in its holder. Reattach the trim piece to the vehicle frame and reconnect the hydraulic tube and electrical connector.

Perform a function test before refitting everything in place. Tighten the screws to fully secure the third brake light.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to replace the stop light of the Mini Clubman
How to replace the stop light of the Mini Clubman
Mini (2014-2023 / F55, F54, F56, F57) In this video we can see how to replace the stop light of a Mini Clubman by ourselves: under the headlight we find a small cap, which can be opened o…
How to Replace the Brake Light Bulb in the Mini Clubman?
How to Replace the Brake Light Bulb in the Mini Clubman?
Mini (2014-2023 / F55, F54, F56, F57) Replacing the brake light bulb in the Mini Clubman is a straightforward and quick task. In this tutorial, you will see how to proceed. First, ensure …
How to Replace the Brake Light Bulb of the Mini Clubman
How to Replace the Brake Light Bulb of the Mini Clubman
Mini (2014-2023 / F55, F54, F56, F57) This guide shows how to replace the brake light bulbs of the Mini Clubman. After securing the vehicle and opening the rear doors, unscrew the Torx T2…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos