Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Error Message on the Mini Cooper S

Model: Mini Mini F56, F55, F57, F54 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Warning light – error code

See other generations:
Video tutorial

To reset the brake pad warning on the Mini Cooper S, first turn on the ignition without starting the engine. At this point, the error message will appear.

Now, press the reset button located on the dashboard to the right of the speedometer once. When the car displays the mileage, press the reset button until the reset message appears.

Then, press the reset button until the car indicates that the reset is in progress. Now, release the reset button and wait for the car to complete the reset.

To ensure everything has gone well, turn off and then turn on the ignition again. If all went well, the car will no longer show errors.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

Mini (2001-2007 / R50, R52, R53) Today we will see the instructions that will allow us to reset the airbag malfunction warning light of the Mini Cooper. First, let's get inside the v…
Mini (2001-2007 / R50, R52, R53) If the tyre pressure warning light on your Mini Cooper R52 stays illuminated on the instrument panel and you want to reset it manually, follow these …
Mini (2001-2007 / R50, R52, R53) In this video, we show how to reset the windows of a Mini Cooper with a convertible roof after the battery has been changed or has run flat. In this …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Mini 2010-2016 - How do you reset the brake wear warning light on the Mini Countryman? Read answer

Adjusting the Handbrake on a Kia Sportage

Today, learn how to adjust the handbrake on a Kia Sportage (2016-2022). Start by opening the armrest and removing the bottom with a small flat screwdriver as shown in the video. Next, remove the inner panel on the handbrake side to access its adjustment nut. Once done, use a spanner to turn the nut clockwise to increase the handbrake tension, or alternatively, loosen the tension by turning the nut anti-clockwise. After adjusting the cable tension, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos