Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Mini Cooper

Model: Mini Mini R53, R52, R50 - Years 2001-2007
Part: Front bumper

This guide shows you the procedure to remove and replace the front bumper of the Mini Cooper in simple steps. First, open the bonnet and start unscrewing all the fixing screws located at the top and sides of the front bumper; then, detach and remove the side panels as shown in the video. At this point, gently pry on the sides of the bumper until you can detach and completely remove it; all that’s left is to install the new front bumper by applying the reverse procedure of disassembly!

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of a Mini Cooper
Removing the Front Bumper of a Mini Cooper
Mini (2007-2014 / R56, R55, R57) Today's video will show you the procedure for removing and replacing the front bumper of a Mini Cooper, following the instructions below. First, open…
How to Remove the Rear Bumper from a Mini Cooper
How to Remove the Rear Bumper from a Mini Cooper
Mini (2014-2023 / F56, F57, F54, F55) Before you can start, open the tailgate of your Mini Cooper's boot. Begin by unclipping and removing the rear light surrounds, then unscrew and remov…
How to Remove the Front Bumper on a Mini Cooper S
How to Remove the Front Bumper on a Mini Cooper S
Mini (2014-2023 / F56, F57, F54, F55) To remove the front bumper on a Mini Cooper S, open the bonnet to access the components located in the engine compartment: here you can identify the …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos