Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the antenna of a Mini Cooper.

Model: Mini Mini F55, F56, F57, F54 - Years 2014-2023

If we want to replace the radio antenna terminal on this car model, in the following description we can find all the necessary steps and useful information for the replacement. We can also refer to the images shown in the video. First, it is necessary to remove the plastic covering the threading with a cutter. Then, unscrew the old antenna terminal and remove it, and proceed to screw in the new one in its place after positioning the rubber cover for thread protection, and that's it.

Posted on 26 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the antenna of the Mini Cooper.
How to remove the antenna of the Mini Cooper.
Mini (2010-2016 / R60, Countryman1) Removing the antenna from the Mini Cooper S R56 is a very simple operation that can be carried out independently. Today, with the help of this very s…
How to replace the antenna base of the Mini Cooper.
How to replace the antenna base of the Mini Cooper.
Mini (2007-2014 / R55, R57, R56) Today we will see the procedure that will allow us to disassemble and replace the base of the Mini Cooper antenna, following the instructions below. …
How to change the antenna in Mini Cooper?
How to change the antenna in Mini Cooper?
Mini (2010-2016 / R60, Countryman1) The Mini Cooper antenna is supported by a single screw installed under the roof bodywork. To replace the antenna we must therefore work our way to ac…

    Frequently Asked Questions

    • Mini 2010-2016 - Where is the inflation kit located on the Mini Countryman? Read answer

How to Replace the Brake Pads on a BMW X3

For this operation, you will need to remove the wheel where you will perform the replacement, so it will be convenient to lift your vehicle and place it on jack stands; this way, you will work much more comfortably. To remove the spring that holds the front pads, use a flathead screwdriver. Now, unscrew the bolts that secure the piston to the pads, then remove it, giving you access to both pads that brake the rotor. Of course, repeat the same steps on the other side if the same replacements are needed.

Watch the video!


by ScegliAuto

More videos