Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Antenna from the Mini Cooper

Model: Mini Mini R60, Countryman1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Antenna

See other generations:
Video tutorial

Removing the antenna from the Mini Cooper S R56 is a very simple operation that can be done independently. Today, this brief video tutorial will explain how to carry out this procedure.

First, start by unscrewing the antenna thread with a bit of force. Next, take a spray can and degrease the inside of the new antenna, and as shown in the video, insert the new antenna.

The Mini Cooper antenna can also be purchased online from specialist sites or on Amazon at a relatively low cost. The original antenna is quite unattractive, and many buyers tend to replace it after a trial period.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

Mini (2007-2014 / R57, R56, R55) In this video, learn how to remove the antenna and its base on the Mini Cooper R56 by following these simple steps. First, open the boot and start by…
Mini (2010-2016 / R60, Countryman1) The antenna on the Mini Cooper is supported by a single screw located beneath the roof's bodywork. To replace the antenna, you need to gain access to…
Mini (2007-2014 / R57, R56, R55) Today, follow the procedure to remove and replace the antenna base on a Mini Cooper, using the instructions below. First, open the boot and gently de…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos