Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Mini Cooper R50 remote control.

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Key

In this very short tutorial, we can see how to change the battery of a Mini Cooper R50 remote control, a model produced from 2001 to 2007. To perform this operation, we will only need the help of a small flathead screwdriver and a new battery. First, take our screwdriver and insert it into the keyring eyelet, from here we start to carefully pry to lift and remove the back cover of the key. Once this is done, we can immediately remove the old battery and replace it with a new one. The battery for this remote control model is the CR2025 3V.

Posted on 5 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Mini Cooper key
How to replace the battery of the Mini Cooper key
Mini (2001-2007 / R52, R50, R53) When the battery of the key of the Mini Cooper model r50 is low, problems related to the opening and closing of the vehicle start to occur, in newer …
How to replace the key battery on the Mini Cooper R50 - R52 - R53
How to replace the key battery on the Mini Cooper R50 - R52 - R53
Mini (2001-2007 / R52, R50, R53) In this video tutorial we will see how to remove and replace the key remote control battery on the Mini Cooper, in the R50, R52 and R53 versions. Fir…
How do you replace the battery of the Mini Cooper remote control?
How do you replace the battery of the Mini Cooper remote control?
Mini (2001-2007 / R52, R50, R53) To replace the battery of the Mini Cooper remote control, you need to use an object like a screwdriver to pry open the back of the device. This will …

Other guides you may be interested in

How to Replace Engine Oil and Filter on a Ducati Monster

How to replace engine oil and filter on a Ducati Monster? Follow this guide to perform maintenance. Position the motorcycle on the original stand, use a socket wrench to unscrew the oil sump bolt (drain the fluid into a container for disposal). Remove the worn oil filter with a strap wrench and fit a new one after cleaning the oil sump (check the gasket around the filter). Finally, top up with new fluid in the engine and close with the plastic inspection cap. Start the motorcycle to verify.

Watch the video!


by ScegliAuto

More videos