Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Interior and Number Plate LED Lights in a Mini Cooper S (R 56)

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Interior dome light bulb

See other generations:
Video tutorial

In this video tutorial, you will see how to install interior and number plate LED lights in a Mini Cooper S (R 56) by following a few simple steps. Start by replacing the boot light; to remove the boot light, simply press the metal tab on one side to extract the entire bulb holder.

Remove the old bulb and insert the new one, then reconnect the bulb holder connector. Now, replace the footwell light; to do this, pull the bulb holder from under the dashboard.

Using a screwdriver, lift the side part, and then you can pull out the bulb holder. Disconnect the bulb connector and replace the old bulb with the new one. After reconnecting the bulb, insert it back into the bulb holder and then place the holder back into its position.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Install the Rear Camera on a Mini Cooper
How to Install the Rear Camera on a Mini Cooper
Mini (2014-2023 / F55, F54, F56, F57) This guide provides instructions for installing the rear camera on a Mini Cooper. First, open the rear hatch of the boot and begin removing the inter…
Replacing Number Plate Lights in Mini Cooper
Replacing Number Plate Lights in Mini Cooper
Mini (2007-2014 / R57, R56, R55) To replace the number plate lights in a Mini Cooper, follow these steps: 1) Disconnect the battery. 2) Locate the light unit where the battery is hou…
How to Replace the Headlining on a Mini Cooper?
How to Replace the Headlining on a Mini Cooper?
Mini (2001-2007 / R53, R50, R52) To replace the headlining on a Mini Cooper, remove all components that obstruct the headlining's removal: loosen all screws securing the internal rea…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos