Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

To reset the oil indicator on the Mini Cooper.

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Service warning light

In this video, we see how to reset the service indicator light on the Mini Cooper: we put the key in the "ON" position to turn on the instrument panel, then we need to press the button located on the right side of the speedometer until the display shows the outline of the car with an exclamation point surrounded by a circle. We use the selector on the left side of the steering wheel by pressing the "bc" button at the end of the lever until the reset is complete. When the remaining kilometers for the next service appear, we can release the buttons. Just to be sure, we turn off the instrument panel and turn it back on to check that the maintenance light has disappeared.

Posted on 1 October 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Mini Cooper R52
How to reset the tire pressure sensor of the Mini Cooper R52
Mini (2001-2007 / R52, R50, R53) If the tire pressure warning light on your Mini Cooper R52 continues to stay on constantly on the instrument panel and you want to manually reset it,…
Brake fluid flush on Mini Cooper
Brake fluid flush on Mini Cooper
Mini (2014-2023 / F57, F56, F55, F54) Today we will see how to reset the brake oil light on a MINI Cooper F series. Let's start by turning on the vehicle's instrument panel, then press th…
How to reset the oil light on the Mini Cooper
How to reset the oil light on the Mini Cooper
Mini (2014-2023 / F57, F56, F55, F54) Manually resetting the engine oil light on your Mini Cooper is very simple and thanks to the procedure described in the following guide, you will hav…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos