Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle and Replace the Key Shell of the Mini Cooper

Model: Mini Mini R53, R52, R50 - Years 2001-2007
Part: Key

Today's guide will show you the main steps for dismantling and replacing the key shell of the Mini Cooper. First, take your key and start prying on the side to open the remote into two parts; then remove the battery and the circuit board from it, as shown in the video. At this point, transfer everything to the new key shell, following the assembly sequence of the components; once the two parts are secured, check the functionality of the controls, following the video tutorial to the end!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2010-2016 / Countryman1, R60) Programming a new remote for the Mini Cooper is a somewhat complicated task best left to a professional. To program the remote, you must completely d…
Mini (2007-2014 / R56, R55, R57) To replace the shell of a Mini Cooper key, you will need a small craft knife with a very thin blade and a small screwdriver. Take your car key and us…
Mini (2001-2007 / R53, R52, R50) Let's see the instructions that will allow us to open the key remote of the Mini Cooper and carry out the repair or replacement of the shell. First o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos