Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Fitting a Smartphone Holder on a Mini with an Analog Speedometer

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Body

In this video, we will see how to fit a smartphone holder on a vehicle with an analog speedometer. We couldn't find the exact model of holder, but a very similar one, from mokingda.com, with code C162-A004-B, priced at £12.79 with free delivery. You need to unscrew the two screws at the base of the speedometer with a 20 mm Torx screwdriver. The space is tight and the job is not very easy. Then you can remove the speedometer by disconnecting the plug. You will need to unscrew the two screws on the right side of the speedometer, as we will need to place spacers to support the bracket, which we will then secure with the screws from the kit. Now reassemble the speedometer. Now attach the phone holder to the bracket, secure it with its butterfly, and the job is done.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2010-2016 / Countryman1, R60) This video shows how to connect your smartphone to the Bluetooth system of a Mini's car radio. Activate Bluetooth on your smartphone and set the car …
Mini (2017-2023 / Countryman2, F60) Through this very useful video guide, you will be able to see the entire procedure necessary to reset the service light on a Mini Countryman, second …
Mini (2001-2007 / R53, R52, R50) By carefully following the steps shown in the video, you cannot go wrong when fitting the wiper blades on your Mini Mino R50. First, ensure that the …

    Frequently Asked Questions

    • Mini 2007-2014 - How to open the bonnet on a Mini Cooper when the cable is broken? Read answer
    • Mini 2007-2014 - What to do when the hood of the Mini Cooper does not open? Read answer

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos