Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the key fob battery in the Mini Cooper

Model: Mini Mini F56, F57, F54, F55 - Years 2014-2023
Part: Key

Today's guide will show you how to disassemble and replace the battery in the Mini Cooper key fob. First, take your remote and remove the physical key from inside it; then pry open the rear cover to access the circuit board and battery, as shown in the video. At this point, remove and replace the battery with a new one of the correct type (in this case, a CR 2032 3V); insert the battery the right way round and reassemble the fob casing!

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2007-2014 / R56, R55, R57) Today, we will look at the instructions for removing and replacing the battery of the remote key for the Mini Cooper. First, take the remote in hand …
Mini (2007-2014 / R56, R55, R57) Is the battery in the remote key flat? Here’s how to replace it on a Mini Cooper. Take your remote key and use a screwdriver to pry between the two p…
Mini (2014-2023 / F56, F57, F54, F55) In this tutorial, you will see the instructions for disassembling and replacing the battery in the Mini Cooper remote key, in simple steps. First, ta…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos