Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the windows of the 2009 Mini Cooper.

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Warning light – error code

The reset of the centralized opening of the automatic windows may be necessary after replacing the car battery, especially on a 2009 Mini Cooper vehicle. To perform the reset, it is necessary to enter the vehicle and press the buttons for opening and closing the window first on the driver's side and then on the passenger's side. Let's start by sliding the window up, hold it down for a few seconds, then slide it down, hold it down for a few seconds, and move on to the passenger's side window. Once the opening and closing are completed, there should no longer be any issues.

Posted on 23 January 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Mini Cooper
How to reset the service light on the Mini Cooper
Mini (2010-2016 / Countryman1, R60) The service light reset on a Mini Cooper F60 model vehicle follows simple and quick steps to be performed independently. To reset the light, we must …
How to reset the brake service light on the Mini Cooper
How to reset the brake service light on the Mini Cooper
Mini (2007-2014 / R56, R57, R55) The reset of the brake service light of the Mini Cooper model F56 follows a very simple procedure to be carried out independently. To perform the res…
How to reset the service light on a Mini Cooper
How to reset the service light on a Mini Cooper
Mini (2014-2023 / F57, F56, F55, F54) Today we will explain how to reset the service light on a Mini Cooper vehicle. To reset the light, we need to turn on the instrument panel and press …

Other guides you may be interested in

How to Remove the Steering Wheel from a Citroen C3

How do you remove the steering wheel from a Citroen C3? Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Follow these steps to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then, using a socket or screwdriver, undo the screws securing the steering wheel cover (where the airbag is located). Once the airbag (driver's side) is released, disconnect the power connectors and remove it. Using a socket, undo the large central bolt and take the steering wheel off its mount. For reassembly: connect the power connectors, then press the steering wheel with your hands (until it fits into its mount) and subsequently tighten the large bolt.

Watch the video!


by ScegliAuto

More videos