Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mini
  4. :
  5. Mini
  6. : How to disassemble the cabin air fan of the Mini Cooper r55

Mini - Video tutorial

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Interior blower
Operation: How to disassemble the cabin air fan of the Mini Cooper r55

The guide shows how to replace the cabin air fan of the Mini Cooper r55. The first operation to be performed is to remove the finishing panel in the pedal compartment to access the back of the fan motor; use a 16 mm wrench. With a 10 mm wrench, remove the fixing bolts of the electronic component that blocks access to the motor. Remove the three Torx screws fixing the motor, disconnect the power supply and remove the piece; pay attention to the nearby electrical cables. Replace the piece and reassemble everything in position. Check the correct operation before closing the compartment.


Posted on 7 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Mini 2007-2014 - Why isn't the Mini's cabin fan working? Read Answer
    • Mini 2007-2014 - What is the problem with the Mini Cooper fan? Read Answer
    • Mini 2010-2016 - Why is the heater fan of the Mini Countryman not working? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos