Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle and Reassemble a Mini Windscreen Wiper

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Windshield wipers

In this video, see how to change the front wiper blade of your car. Take the wiper blade and apply pressure on the metal tab to release it from the housing and slide it off. Take the new wiper blade and insert it into the U-shaped metal hook; when you hear a click, the blade will be secured in the housing. Ensure the wiper arm is aligned with the other before operating the wiper lever next to the steering wheel, making sure both blades are properly attached.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the windshield wiper motor of the Mini Cooper
Replacement of the windshield wiper motor of the Mini Cooper
Mini (2001-2007 / R53, R50, R52) In this video tutorial, we will see how to disassemble and replace the front windshield wiper motor of the Mini Cooper, following these simple steps.…
Guide to replacing the wiper motor of the Mini Cooper.
Guide to replacing the wiper motor of the Mini Cooper.
Mini (2007-2014 / R55, R57, R56) In this short and simple guide, we will see the instructions that will allow us to disassemble and replace the windshield wiper motor of the Mini Coo…
How to replace the windshield wiper blades of the Mini 2
How to replace the windshield wiper blades of the Mini 2
Mini (2001-2007 / R53, R50, R52) Today we will explain how to replace the front and rear windshield wiper blades of a Mini 2. To perform this operation, we need to lift the front win…

Other guides you may be interested in

Remove the Rear Light of a Nissan Qashqai

Remove the rear light of a Nissan Qashqai to replace the damaged bulbs. Open the boot lid, unscrew the securing bolts located at the side of the rear light using a screwdriver (or socket spanner), and once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with equivalent size and voltage pieces (replace the light if damaged). Finally, refit the light, proceeding in reverse order with the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos