Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Colt
    4. : Headlight

Mitsubishi Colt - Headlight

Mitsubishi Colt (2004-2012 / MK 1, Z30)
How to replace the front headlight bulb of the Mitsubishi Colt
In this video we see how to replace the headlight bulb of a Mitsubishi Colt. We will need to open the front hood; the bulbs are easily accessible from inside …read all…
Posted on 4 March 2024 by ScegliAuto
Mitsubishi Colt (2004-2012 / MK 1, Z30)
How to remove the headlight of the Mitsubishi Colt?
Let's find out in this short guide how to remove and replace the headlight on the Mitsubishi Colt first series, in simple and quick steps. First of all we open …read all…
Posted on 2 March 2024 by ScegliAuto
Mitsubishi Colt (2004-2012 / MK 1, Z30)
Remove the headlight bulbs on Mitsubishi Colt
To remove the headlight bulbs on Mitsubishi Colt? Let's see how they replace each other. We remove the plastic coating in the lower part of the bumper (stone …read all…
Posted on 13 December 2023 by ScegliAuto
Shock absorbers (1) Car stereo (5) Battery (1) Spark plugs (1) Glove box (1) Key (2) -board computer (2) Checks and maintenance (6) Headlight (3) Air filter (3) Cabin air filter (2) Headlight bulb (4) Rear light bulb (3) Engine oil (5) Door panel (2) Brake pads (1) Fuel pump (1) Instrument cluster (1) Fuse box (2) Suspensions (1)

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos