Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Colt
    4. : Engine oil

Mitsubishi Colt - Engine oil

Mitsubishi Colt (2004-2012 / MK 1, Z30)
How to change the oil and filter in the Mitsubishi Colt?
The amount of engine oil that the Mitsubishi Colt needs is 5.2 liters. This must have a viscosity coefficient equal to 5W40. In addition to the engine oil, we …read all…
Posted on 5 August 2022 by ScegliAuto
Mitsubishi Colt (2004-2012 / MK 1, Z30)
How to change the engine oil on the Mitsubishi Colt
If we want to replace the engine oil on this car model in do-it-yourself mode, we can find information and directions on how to behave in the video and …read all…
Posted on 16 June 2022 by ScegliAuto
Mitsubishi Colt (2004-2012 / MK 1, Z30)
Change the engine oil and oil filter of the Mitsubishi Colt 1.1
Today we will see the instructions necessary to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Mitsubishi Colt. …read all…
Posted on 12 April 2022 by ScegliAuto
Mitsubishi Colt (2004-2012 / MK 1, Z30)
How to perform the service on Mitsubishi Colt
In this short video tutorial we are going to see how the service is carried out, that is, the change of the engine oil and its filter on a Mitsubishi Colt. …read all…
Posted on 30 April 2024 by ScegliAuto
Mitsubishi Colt (2004-2012 / MK 1, Z30)
How to change oil on Mitsubishi Colt
Changing the engine oil on a Mitsubishi Colt? We lift the car on a Crick and identify the pin to be removed. With a socket wrench we unscrew the large locking …read all…
Posted on 15 December 2023 by ScegliAuto
Shock absorbers (1) Car stereo (5) Battery (1) Spark plugs (1) Glove box (1) Key (2) -board computer (2) Checks and maintenance (6) Headlight (3) Air filter (3) Cabin air filter (2) Headlight bulb (4) Rear light bulb (3) Engine oil (5) Door panel (2) Brake pads (1) Fuel pump (1) Instrument cluster (1) Fuse box (2) Suspensions (1)

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos